Siviko Wire Pay-off | WPO 850
SIVIKO WPO 850 is an Industry 4.0 enabled, automated wire pay-off machine, which offers cable manufactures high-speed, reliability and high safety standards in operations. It is the perfect fit for bobbin winders, take-up machines etc.
WPO 850 can reach up to 850 m/min of wire pay off, with a ramp-up time of 10 s, through:
- Precise pneumatic wire tension control,
- Precise motor speed control,
- Precise PID controlled dancer,
- Efficiency Level – IE3.
Easy to work with:
WPO 850 has been designed with the work of the operator in mind. It has several unique features that make work easier:
- Wire pay-off path direction adjustment up to 90°,
- Singal tower that indicates the state of the machine,
- Diagnostic code blinking system that shows the exact event. The operator can see it even far away from the machine.
WPO 850 has a variety of sensors that ensure its maximum productivity and safe operations.
It is Industry 4.0 enabled, which means that is can integrate easily with many external devices and systems. Communication is done through industry standard RS-485 (Modbus RTU) and Ethernet (Modbus TCP).
WPO 850 has easy to use pneumatic lifting reel system, which has predefined parameters for the standard types of reels.
- Safety fence and a lockable door that makes the reel inaccessible by an accident during operations,
- Reliable safety relay to check and monitor the safety system,
- Sensor and algorithms that stop the machine immediately if there is a change of grip or position of the reel,
- Emergency stop and a brake that could stop the machine in max 2 s.
|Linear speed||850 m/min (max)||* customizable|
|Wire type||Cu, Cu tin-plated|
|Wire bundle size||cross section 0,025 … 0,75 mm2 / diameter 0,18 … 0,95 mm|
|Individual wire size||cross section 0,020 … 0,50 mm2 / diameter 0,16 … 0,80 mm|
|Wire tension||2 N … 20 N||* customizable|
|Ramp up/down for reel 650 kg||min 10 s|
|Number of reels||1|
|Spindle capacity||650 kg (max)|
|Reel dimensions||Ф 560, Ф 630||* customizable|
|Reel standards||DIN46395, DIN46397||* customizable|
|Precise wire tension control||Pneumatic|
|Precise motor speed control||VFD Vector control|
|Precise controlled dancer||PID|
|Accumulator length||3000 mm||* customizable|
|Wire path direction adjustment||90°|
|Easy to use lifting reel system||Pneumatic – predefined positions for the two types of reels||* customizable|
|Jog mode||Push button and pedal operated|
|Dancer roll||Non-metal||* customizable|
|Emergency stop||Twist to release push button|
|Time until full stop||max 5 s at full speed with 650 kg reel|
|Safety fence and door||Auto locked when the operation starts|
|Operation status||Lights and blinking code signals||* customizable|
|Power and Type||7,5 kW / 3 phase asynchronous motor||* customizable|
|Variable Frequency Drive||Vector control|
|Air supply||6 … 10 bar||* customizable|
Interface and Communication
|Analog input||Linear speed set point – 0 … 10 V or 0/4 … 20 mA|
|Run; Fault||Outputs – dry contacts||* customizable|
|Communication||RS-485 (Modbus RTU), Ethernet (Modbus TCP)|
Power supply and mechanical data
|Weight||approx. 650 kg||* customizable|
|Dimensions||1200 х 1110 х 1820 mm (W × D × H)||* customizable|
|Power supply||AC 230/400 V, 50 Hz (AC 220/380 V, 50 Hz); 8 kVA||* customizable|
|Degree of protection of cabinet||IP 51|
|Working temperature||10 … + 50 °C|
|Relative humidity||10 … 90 % without condensation|
Datasheet – English